Bathroom Water Pumps
Sanimarin Pump
Perfect for collecting gray water on boats
Saniswift Pro
Residential/Commercial Heavy-Duty Gray Water Drain Pump - 1/3HP
Saniswift
Residential Low inlets Gray Water Drain Pump - Saniswift - 1/3Hp- Laundry/Sink/Shower/Bathtub<br>Residential drain pump for indoor and outdoor area<br>↑ 14 Ft ↑ and/or ← 140 Ft →<br>Capable of discharging up to 24 GPM<br>Inlets: two 1-1/2”<br>Discharge: 1-1/2” or 1-1/4” + vent<br>Low inlets for easy installation<br>Powerful and Compact design<br>Silent (44 dBa)<br>Certifications: CSA (IPC, NSPC)4 Years limited warranty
Sanishower
Residential/Commercial Low inlets Gray Water Drain Pump - 0.2Hp - Sink/Shower
Frequently Asked Questions
A Saniflo bathroom gray water pump lifts and removes shower, bathtub, and sink water when the drain is above floor level or too far away. It does NOT handle toilet waste. Main models: Saniswift (⅓ HP, multi-inlet), Sanishower (single shower), Sanivite, and Sanicom.
No. Gray water pumps (Saniswift, Saniswift Pro, Sanishower) handle gray water only — shower, bathtub, and sink. For toilet waste, you need a Saniflo macerator or grinder.
The Sanishower requires a minimum shower base height of 6 to 8 inches (15–20 cm) above the finished floor to ensure proper gravity flow into the pump.
Saniswift and Sanishower: up to 95°F–110°F (35°C–43°C). Saniswift Pro: up to 140°F (60°C). Do not exceed the model's ctemperature limits.
A humming pump that won't drain almost always has a blockage at the impeller. Steps: (1) Unplug; (2) Remove pump lid; (3) Manually clear the impeller; (4) Reassemble and test. If the issue persists, call Saniflo tech support.
Saniswift (⅓ HP): multi-inlet pump connecting shower and sink simultaneously. Saniswift Pro: higher-capacity, discharges up to 140 ft horizontally. Sanishower: compact pump for a single shower only. A washing machine should drain into a utility sink first, which then drains into the Saniflo pump.
Yes. The three inlet ports, one top and two bottom, are interchangeable — use any for shower, bathtub, or sink depending on your layout.
The Saniswift Pro discharges up to 140 feet (42 m) horizontally and approximately 14 feet (4.3 m) vertically.
On the pump lid, locate the pre-marked vent cut-out. Cut cleanly along the mark, insert a 1½" vent pipe and connect to the vent system.
Descale every 6 months: unplug, pour half a gallon of Saniflo descaler or plain white vinegar into the connected drain, let sit 2 hours, reconnect and run the pump several times with clean water to rinse.
A Saniflo bathroom gray water pump lifts and removes shower, bathtub, and sink water when the drain is above floor level or too far away. It does NOT handle toilet waste. Main models: Saniswift (⅓ HP, multi-inlet), Sanishower (single shower), Sanivite, and Sanicom.
Saniswift (⅓ HP): multi-inlet pump connecting shower and sink simultaneously. Saniswift Pro: higher-capacity, discharges up to 140 ft horizontally. Sanishower: compact pump for a single shower only. A washing machine should drain into a utility sink first, which then drains into the Saniflo pump.
No. Gray water pumps (Saniswift, Saniswift Pro, Sanishower) handle gray water only — shower, bathtub, and sink. For toilet waste, you need a Saniflo macerator or grinder.
Yes. The three inlet ports, one top and two bottom, are interchangeable — use any for shower, bathtub, or sink depending on your layout.
The Sanishower requires a minimum shower base height of 6 to 8 inches (15–20 cm) above the finished floor to ensure proper gravity flow into the pump.
The Saniswift Pro discharges up to 140 feet (42 m) horizontally and approximately 14 feet (4.3 m) vertically.
Saniswift and Sanishower: up to 95°F–110°F (35°C–43°C). Saniswift Pro: up to 140°F (60°C). Do not exceed the model's ctemperature limits.
On the pump lid, locate the pre-marked vent cut-out. Cut cleanly along the mark, insert a 1½" vent pipe and connect to the vent system.
A humming pump that won't drain almost always has a blockage at the impeller. Steps: (1) Unplug; (2) Remove pump lid; (3) Manually clear the impeller; (4) Reassemble and test. If the issue persists, call Saniflo tech support.
Descale every 6 months: unplug, pour half a gallon of Saniflo descaler or plain white vinegar into the connected drain, let sit 2 hours, reconnect and run the pump several times with clean water to rinse.
Buy with confidence
Made in France
Many products have received the Made in France label.
Experts Since 1958
Creator of the macerating toilet.
Tailored Support
Our team of experts is at your service.
Performance and Reliability
Technologies and materials that ensure efficiency and longevity.
Warranty Extension
Up to 4 years warranty.