Accessories for Macerators & Toilets
To ensure the proper functioning of your macerating toilet and grinder toilet, SFA offers a range of suitable accessories.
Frequently Asked Questions
Saniflo offers two rear-discharge toilet bowls: round (part 083) and elongated (part 087). Both are designed specifically for Saniflo macerators and ensure correct system connection.
Part 005 is the porcelain water tank that sits on top of the Saniflo toilet bowl. It contains the fill valve and float that control the flush volume. Part 005 is compatible with both bowl 083 and bowl 087.
Yes — plain white vinegar is equally effective and will not damage internal components. Ensure it is pure white vinegar, not colored or flavored.
Yes. The solenoid valve is a separately replaceable part at up to $80. Call a plumber or Saniflo tech support to identify the correct part number for your model.
The approximately 2-inch water level is a normal characteristic of Saniflo rear-discharge toilet bowls, not a defect. The lower level results from the rear-discharge bowl's hydraulic seal design. Saniflo bowls use a 3-inch trapway.
Step by step: (1) Unplug the power cord. (2) Pour half a gallon of Saniflo descaler or plain white vinegar into the toilet bowl. (3) Reconnect power. (4) Flush to distribute. (5) Wait 2 hours. (6) Flush 2–3 times with clean water to rinse. Repeat every 6 months
Never use: bleach (Clorox / javex / Cloralex), chemical drain cleaners (Drano, Liquid-Plumr), or any caustic or highly alkaline product. These products irreversibly damage the internal membranes and seals.
Installation manuals: sfasaniflo.com → your product page → 'Documents' tab → download PDF. To order parts: call Saniflo tech support Monday–Friday or contact your authorized dealer. Canadian customers can order parts at spare-parts.saniflo.ca.
Saniflo offers two rear-discharge toilet bowls: round (part 083) and elongated (part 087). Both are designed specifically for Saniflo macerators and ensure correct system connection.
The approximately 2-inch water level is a normal characteristic of Saniflo rear-discharge toilet bowls, not a defect. The lower level results from the rear-discharge bowl's hydraulic seal design. Saniflo bowls use a 3-inch trapway.
Part 005 is the porcelain water tank that sits on top of the Saniflo toilet bowl. It contains the fill valve and float that control the flush volume. Part 005 is compatible with both bowl 083 and bowl 087.
Step by step: (1) Unplug the power cord. (2) Pour half a gallon of Saniflo descaler or plain white vinegar into the toilet bowl. (3) Reconnect power. (4) Flush to distribute. (5) Wait 2 hours. (6) Flush 2–3 times with clean water to rinse. Repeat every 6 months
Yes — plain white vinegar is equally effective and will not damage internal components. Ensure it is pure white vinegar, not colored or flavored.
Never use: bleach (Clorox / javex / Cloralex), chemical drain cleaners (Drano, Liquid-Plumr), or any caustic or highly alkaline product. These products irreversibly damage the internal membranes and seals.
Yes. The solenoid valve is a separately replaceable part at up to $80. Call a plumber or Saniflo tech support to identify the correct part number for your model.
Installation manuals: sfasaniflo.com → your product page → 'Documents' tab → download PDF. To order parts: call Saniflo tech support Monday–Friday or contact your authorized dealer. Canadian customers can order parts at spare-parts.saniflo.ca.
Buy with confidence
Made in France
Many products have received the Made in France label.
Experts Since 1958
Creator of the macerating toilet.
Tailored Support
Our team of experts is at your service.
Performance and Reliability
Technologies and materials that ensure efficiency and longevity.
Warranty Extension
Up to 4 years warranty.




